Shihlin electric SL3 Series, User Manual

Page: 90 / 211

Digital input/ output parameter group 03
PARAMETER DESCRIPTION 88
5.4.1 Digital input terminals function selection

Use the following parameters to change the digital input terminal functions. Each terminal may choose any
function between 0～45 (Note 1)
Parameter Name Default Setting Range Content
03-00
P.83
Terminal STF input
function
0
0 STF(Inverter runs forward)
1 STR(Inverter runs reverse)
2 RL(Multi-speed low speed)
3 RM(Multi-speed medium speed)
4 RH(Multi-speed high speed)
5 Reserved
6 External thermal relay actuate
7 MRS(Stops inverter output immediately)
8 RT(Inverter second function)
9 EXT(External JOG)
10 STF+EXJ
11 STR+EXJ
12 STF+RT
13 STR+RT
14 STF+RL
15 STR+RL
16 STF+RM
17 STR+RM
18 STF+RH
19 STR+RH
20 STF+RL+RM
21 STR+RL+RM
22 STF+RT+RL
23 STR+RT+RL
24 STF+RT+RM
25 STR+RT+RM
26 STF+RT+RL+RM
27 STR+RT+RL+RM
28 RUN(Inverter runs forward)
29
STF/STR(use with RUN signal, when ON, motor runs
reverse； when OFF, motor runs forward)
30 RES(External reset function)
31
STOP(Use as three line control with RUN signal and
STF-STR signal)
32 REX(Extend multi-speed to 16 levels)
33 PO(In “external mode", run programmed operation)
34 RES_E (External reset, valid only when alarm.)
35 MPO (In “external mode” run manual cycle operation.)