Shihlin electric SL3 Series, User Manual

Page: 110 / 211

Protection parameter group 06
PARAMETER DESCRIPTION 106
5.7 Protection parameter group 06
Group
Parameter
Number
Name Setting Range Default Page
06-00 P.9
Electronic thermal relay
capacity
0~500.00A 0.00 107
06-01 P.22
Stall prevention operation
level
0～200% 150% 108
06-02 P.23
Stall prevention operation
level correction factor
0～200%
99999 108 99999: Stall prevention operation level is the
setting value of 06-01(P.22).
06-03 P.66
Stall prevention operation
reduction starting frequency
50Hz system: 0～599.00Hz 50.00Hz
108
60Hz system: 0～599.00Hz 60.00Hz
06-08 P.155 Over torque detection level 0～200.0% 0.0% 110
06-09 P.156 Over torque detection time 0～60.0s 1.0s 110
06-10 P.260
Action when detect over
torque
0: OL2 alarm will not be reported after over
torque detection, and inverter keeps running.
1 110
1: OL2 alarm will be reported after over torque
detection, and inverter stops.
06-13 P.281 Input phase loss protection
0: Off
0 111 1: When input phase loss, built-in keypad shows
IPF alarm and inverter stops
06-17 P.261 Maintenance alarm function
0: Off
0 110 1～9998day: Used to set the time for
maintenance alarm output signal
06-18 P.280
Short circuit protection
function
X0: Turn off short circuit to ground detect when
inverter start
10 110
X1: Short circuit to ground detect when inverter
start
0X: Turn off output short circuit,
1X: When output short circuit, built-in keypad
shows SCP alarm and inverter stops
06-27 P.292
Total inverter operation time
(minutes)
0～1439 min 0min 111
06-28 P.293
Total inverter operation time
(days)
0～9999 day 0day 111
06-29 P.296
Total inverter power on time
(minutes)
0～1439min 0min 111
06-30 P.297
Total inverter power on time
(days)
0～9999day 0day 111
06-40 P.288 Alarm record code query Choose 0～12 recorded alarm 0 112
06-41 P.289 Alarm record code display Read only
Read
only
112
06-42 P.290 Alarm record message query Choose 0～10 recorded alarm 0 112
06-43 P.291
Alarm record message
display
Read only
Read
only
112