Shihlin electric SL3 Series, User Manual

Page: 165 / 211

Appendix 1 Parameter table
Appendix 161
Parameter
Number
Group Name Setting Range Default Page
P.41 03-20
Output frequency
detection sensitivity
0～100.0% 10.0% 95
P.42 03-21
Output frequency
detection for forward
rotation
0～599.00Hz 6.00Hz 95
P.43 03-22
Output frequency
detection for reverse
rotation 0～599.00Hz
99999 95
99999: Same as the setting of 03-21(P.42)
P.44 01-22 Second acceleration time
0～360.00s/0～3600.0s
99999 72
99999: Off
P.45 01-23 Second deceleration time
0～360.00s/0～3600.0s
99999 72
99999: Off
P.46 01-24 Second torque boost
0～30.0%
99999 72
99999: Off
P.47 01-25 Second base frequency
0～599.00Hz
99999 72
99999: Off
P.48 07-03 Data length
0：8bit
0 114
1：7bit
P.49 07-04 Stop bit length
0：1bit
0 114
1：2bit
P.50 07-05 Parity check selection
0：No parity check
0 114 1：Odd
2：Even
P.51 07-06 CR/LF selection
1：CR only
1 114
2：Both CR and LF
P.52 07-08
Number of
communication retries
0～10 1 114
P.53 07-09
Communication interval
allowed time
0～999.8s：Check communication timeout with the set
value
99999 114
99999：No timeout check
P.56 02-52
Inverter rated current
display level
0~500.00A
According
to kW
84
P.57 10-09 Restart idling time
0～30.0s
99999 140
99999: Off.
P.58 10-10 Restart rising time 0～60.0s 10.0s 140
P.59 00-10
Built-in keypad set target
frequency selection
XXX0: Use up down button on built-in or external
keypad to set frequency
0 52
XXX1: Use keypad knob on external keypad to set
frequency
XXX2：Use keypad knob on built-in keypad to set
frequency
X0XX: Every frequency change will save after 30s
X1XX: Every frequency change will save after 10s