Shihlin electric SL3 Series, User Manual

Page: 134 / 211

PID parameter group 08
PARAMETER DESCRIPTION 130
5.9 PID parameter group 08
Group
Parameter
number
Name Setting range Default Page
08-00 P.170 PID function selection
0: Off
0 131
2：Parameter 08-03(P.225) as target value, terminal 3-5
current/voltage input as feedback source
08-01 P.171
PID feedback control
method 0: Negative feedback control.
0 131
1: Positive feedback control.
08-03 P.225
PID target value from
keypad
0～08-43（P.251） 20.0% 131
08-04 P.172 Proportional gain 1~100 20 131
08-05 P.173 Integral time 0～100.0s 1.0s 131
08-06 P.174 Differential time 0～10000ms 0ms 131
08-07 P.175 Abnormal deviation 0～100.0% 0.0% 131
08-08 P.176 Abnormal duration time 0～600.0s 30.0s 131
08-09 P.177 Abnormal processing mode
0: Stop freely
0 131 1: Slow down to stop
2: Alarm and continue operation
08-10 P.178 Sleep detection deviation 0～100.0% 0.0% 131
08-11 P.179
Sleep detection duration
time
0～255.0s 1.0s 132
08-12 P.180 Wake-up level 0～100.0% 90.0% 132
08-13 P.181 Stop level 0～120.00Hz 40.00Hz 132
08-14 P.182 Upper integral limit
50Hz system:0～120.00Hz 50.00Hz
132
60Hz system:0～120.00Hz 60.00Hz
08-15 P.183
Deceleration step length
when stable
0～10.00Hz 0.50Hz 132
08-18 P.223 Analog feedback signal bias 0～100.0% 0.0% 132
08-19 P.224
Analog feedback signal
gain
0～100.0% 100.0% 132
08-43 P.251
PID pressure range (Bar)
setting
1.0~100.0 100.0 135
08-45 P.253
Analog signal feedback loss
detection time
0～600.0 0.0 s 135
08-46 P.254
Analog signal feedback loss
action selection
0：Alarm AErr and inverter stop freely
0 135 1：Slow down to stop then alarm AErr
2：Alarm AErr and continue operation