Shihlin electric SL3 Series, User Manual

Page: 129 / 211

Communication parameter group 07
PARAMETER DESCRIPTION 125

Communication command list
Set the following command codes and data to perform various operation control, monitoring, etc.
Item
Shihlin protocol
command code Modbus
command code Modbus
address
Data content and function description
Operation mode read
out
H7B H03
H1000
H0000: Communication mode;
H0001: External mode;
H0002: JOG Mode;
H0003: Combined mode 1;
H0004: Combined mode 2;
H0005: Combined mode 3;
H0006: Combined mode 4;
H0007: Combined mode 5;
H0008: PU Mode;
Operation mode write
in
HFB H06/H10
Inverter status
monitoring
H7A H03 H1001
H0000~H00FF
b15：during tuning
b14:
during inverter reset
b13, b12: Reserved
b11: inverter E0 status
b10~8: Reserved
b7：alarm occurred
b6：frequency detect
b5：Parameters reset end
b4: overload
b3: frequency arrive
b2: during reverse rotation
b1: during forward rotation
b0: running
Target
frequency
write-in
EEPROM
HEE
H06/H10
H1009
H0000~ HE9FC：0~599.00Hz
RAM HED H1002
Special monitor
codes read out
H7D H03
H1013
H0000~H0010: monitor selected information.
Please refer to special monitoring code table
(H0009 reserved)
Special monitor
codes write in
HF3 H06/H10
Monitor external
operation
H7C H03 H1012 H0000~H000F：
b0 b3
b2 b1
b15~b4
RES STF
STR
MRS 0000 0000 0000
Inverter reset HFD
H06/
H10
H1101
H9696: function of 00-02=2/P.997=1.
When communicating with upper controller, inverter
cannot return data to upper controller because
inverter is reset.
Parameter clear HFC
H06/
H10
H1104
H5A5A
Please refer to parameter
recovery table for details.
H5566
H5959
H1103 H9966
H1106
H9696
H99AA
H9A9A
H1105 H55AA
H1102 HA5A5