Shihlin electric SL3 Series, User Manual

Page: 176 / 211

Appendix 1 Parameter table
Appendix 172
Parameter
Number
Group Name Setting Range Default Page
P.257 01-38
S curve time at the beginning of
deceleration
0～25.00s/0～250.0s
99999 73
99999: Off
P.258 01-39
S curve time at the end of
deceleration 0～25.00s/0～250.0s
99999 73
99999: Off
P.259 00-09 Speed display unit selection
0: Speed display unit is 1
1 51
1: Speed display unit is 0.1
P.260 06-10 Action when detect over torque
0: OL2 alarm will not be reported after over
torque detection, and inverter keeps running.
1 110
1: OL2 alarm will be reported after over torque
detection, and inverter stops.
P.261 06-17 Maintenance alarm function
0: Off
0 111
1～9998day: Used to set the time for
maintenance alarm output signal
P.268 10-46 Voltage stall level
220V : 155～400V 380V
148
440V : 310～800V 760V
P.280 06-18 Short circuit protection function
X0: Turn off short circuit to ground detect when
inverter start
10 111
X1: Short circuit to ground detect when inverter
start
0X: Turn off output short circuit,
1X: When output short circuit, built-in keypad
shows SCP alarm and inverter stops
P.281 06-13 Input phase loss protection
0: Off
0 111
1: When input phase loss, built-in keypad shows
IPF alarm and inverter stops
P.283 13-04 Current detection method 0～2 2 151
P.286 13-03
High frequency vibration
Suppression factor
0～15 0 151
P.288 06-40 Alarm record code query Choose 0～12 recorded alarm 0 112
P.289 06-41 Alarm record code display Read only
Read
only
112
P.290 06-42 Alarm record message query Choose 0～10 recorded alarm 0 112
P.291 06-43 Alarm record message display Read only
Read
only
112
P.292 06-27
Total inverter operation time
(minutes)
0～1439 min 0 min 111
P.293 06-28
Total inverter operation time
(days)
0～9999 day 0 day 111
P.294 00-04 Password parameter 0~65535 0 48
P.295 00-05 Password setup 2~65535 0 48
P.296 06-29
Total inverter power on time
(minutes)
0～1439 min 0 min 111
P.297 06-30
Total inverter power on time
(days)
0～9999 day 0 day 111