VLT
®
5000 and Interbus CMD
1
MN.50.U1.02 - VLT is a registered Danfoss trademark
■
■
■
■
■
VLT 5000 Interbus card
The photo shows the Interbus card which can be
installed in VLT 5001 - 5500.
Name
Name
Name
Name
Name
Indicates
Indicates
Indicates
Indicates
Indicates
Color
Color
Color
Color
Color
On
On
On
On
On
OFF
OFF
OFF
OFF
OFF
CC/CR: Cable Check.
Green
Incoming bus active
Incoming bus swicthed off
BA
Bus Active.
Green
Bus active
Bus stopped
RD:
Status of outgoing bus. Red
Outgoing bus stopped
Outgoing bus active
TR:
Transmit/Receive.
Green
PCP Communication running
NO PCP Communication running
UL:
Power OK.
Green
Voltage within permissible range
No Voltage
All examples in this instruction are shown with a
PLC card as an Interbus master, but they are also
relevant to a PC system with an Interbus Master.
■
■
■
■
■
Abstract
This application note describes how to set up
Interbus communication between a Danfoss VLT
5000 frequency converter and Interbus CMD G4.
CMD stand for Configuration Monotoring and
Diagnostics.
This note will describe:
●
Configuring of the VLT 5000 and CMD
●
Drivecom profile
●
PCP communication
Interbus connection for Bookstyle
IBS IN IBS OUT
IBS OUT IBS IN
Interbus connection for Compact
TR
TR
CC/CR
RD
BA
RD
UL
UL
CC/CR
BA
LED identification