Sharp MX-C402SC, Operation Manual, Page: 692 / 822

7-38
SYSTEM SETTINGS
Contents
*1 When a 500-sheet paper feed unit is installed.
*2 When a finisher is installed.
*3 When a color-related problem has occurred.
Copy Function Settings
X
Disabling of Color Mode *
3
Disabled 7-70
●
Fusing Control Settings 16 - 23 lbs. (60 - 89 g /m
2
) 7-70
Item Factory default setting Page
■
Copy Function Settings
7-71
●
Initial Status Settings
7-71
X
Color Mode Full Color
X
Paper Tray Tray 1
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output Auto
●
Other Settings 7-72
X
Copy Exposure Adjustment
7-72
‹
Color 5
‹
Black & White 5
X
Add or Change Extra Preset Ratios – 7-72
X
Setting a Maximum Number of Copies 999 7-72
X
Initial Margin Shift Setting
7-72
‹
Side 1 1/2"
‹
Side 2 1/2"
X
Erase Width Adjustment
7-72
‹
Edge Clearance Width 1/2"
X
Card Shot Settings
7-72
‹
Original Size X: 3-3/8", Y: 2-1/8"
‹
Fit to Page Disabled
X
Disabling Deletion of Job Programs Disabled 7-72
X
Disabling of Bypass-Tray in Duplex Copy Disabled 7-72
X
Disabling of Auto Paper Selection Disabled 7-72
X
Auto Selection of Paper Tray that was Last Loaded Disabled 7-73
X
Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-73
X
Color Quick Scan from Document Glass Disabled 7-73
X
B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-73
X
B/W Quick Scan from Document Glass Disabled 7-73
Item Factory default setting Page