manualshive.com logo in svg

Sharp MX-C402SC, Operation Manual, Page: 47 / 822

Share
Download
Sharp MX-C402SC Operation Manual Download Page 47

1-6

BEFORE USING THE MACHINE

Contents

(23) Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to 
open the right side cover.

☞

8. TROUBLESHOOTING "

REMOVING MISFEEDS

" 

(page 8-10)

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT 
GLASS

(1)

Paper feed roller

This roller rotates to automatically feed the original.

(2)

Document exit area cover

Open this cover to remove an original misfeed.

(3)

Original exit tray 1

Originals are delivered to this tray after scanning.

(4)

Document feeding area cover

Open this cover to remove an original misfeed or clean 
the paper feed roller.

☞

8. TROUBLESHOOTING "

REMOVING MISFEEDS

" 

(page 8-10)

(5)

Original guides

These help ensure that the original is scanned correctly. 
Adjust the guides to the width of the original.

☞

PLACING THE ORIGINAL

 (page 1-36)

(6)

Document feeder tray

Place originals in this tray. 1-sided originals must be 
placed face up.

☞

PLACING THE ORIGINAL

 (page 1-36)

(7)

Original exit tray 2

If originals are not be delivered to original exit tray 1 after 
scanning, they are delivered to this tray.

(8)

Scanning area

Originals placed in the document feeder tray are scanned 
here.

(9)

Document glass

Use this to scan a book or other thick original that cannot 
be fed through the automatic document feeder.

☞

PLACING THE ORIGINAL ON THE DOCUMENT 
GLASS

 (page 1-39)

(2)

(3)

(4)

(8)

(7)

(9)

(5)

(6)

(1)

Summary of Contents for MX-C402SC























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments