manualshive.com logo in svg

Sharp MX-C402SC, Operation Manual, Page: 402 / 822

Share
Download
Sharp MX-C402SC Operation Manual Download Page 402

4-51

FACSIMILE

Contents

Specifying the send size of the original

Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smaller than the scan size is selected, the image will be reduced.

The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by 
numerical values.

1

Touch the [Original] key.

☞

IMAGE SETTINGS

 (page 4-44)

2

Touch the [Send Size] key.

3

Specify the send size.

(1) Touch the desired send size key.

(2) Touch the [OK] key.

• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys 

that cannot be specified for the "Send Size" are grayed out to prevent selection.

• To specify an AB size for the send size, touch the [AB

Inch] key to highlight the [AB] side and then specify the 

send size.

Auto

8

½x11

Scan Size

Send Size

100%

Fax/Original

OK

2-Sided
Booklet

2-Sided
Tablet

Image Orientation

11x17

Auto

Fax/Original

Manual

OK

Inch

AB

5½x8½

8½x11

8½x14

8½x13

8½x13  

(2)

(1)

Summary of Contents for MX-C402SC























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments