manualshive.com logo in svg

Sharp MX-C402SC, Operation Manual, Page: 242 / 822

Share
Download
Sharp MX-C402SC Operation Manual Download Page 242

2-85

COPIER

Contents

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)

This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Place the original in the automatic document feeder.

☞

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER

 (page 1-36)

After placing the original, specify the original size.

☞

ORIGINAL SIZES

 (page 2-30)

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Color Adjustments] key.

(3) Touch the [RGB Adjust] key.

☞

[Color Adjustments] KEY

 (page 2-84)

3

Adjust red, green, or blue.

(1) Touch the key of the color that you wish to 

adjust: [R (Red)], [G (Green)], or [B (Blue)].

Only one color can be adjusted. (If you adjust one color 
and then adjust another color, the adjustment of the first 
color is canceled.)

(2) Adjust the selected color.

Touch the [+] key to strengthen the selected color, or 
touch the [-] key to weaken the color.

(3) Touch the [OK] key.

You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.

4

Press the [COLOR START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned 
and then touch the [Read-End] key.

To cancel scanning and copying...

Press the [STOP] key (

).

R(Red)+

G(Green)+

B(Blue)+

OK

OK

Cancel

Color Adjustments

RGB Adjust

Only one color can be adjusted.

R(Red)

G(Green)

B(Blue)

2

1

0

-1

-2

(1)

(3)

(2)

Summary of Contents for MX-C402SC























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments