Sharp MX-C402SC Operation Manual Download Page 566

Page: 566 / 822

5-89

SCANNER/INTERNET FAX

Contents

SCAN THE ORIGINAL DELETING THE COLORED
PORTIONS (Drop Out Color)

The original's colored portions (portions other than black) can be erased.

• This feature can only be used when set to [Mono2] in [Color Mode].

• When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text".

• This function cannot be used in Internet fax mode.

Place the original.

Place the original face up in the document feeder tray, or face
down on the document glass.

☞

PLACING THE ORIGINAL

(page 1-36)

When the original is a different size than the size setting, set
the original size.

☞

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE

(page 5-54)

Specify the destination.

☞

ENTERING DESTINATIONS

(page 5-18)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

☞

SPECIAL MODES

(page 5-70)

ABCD

abcd

1234

5678

XYZ

1234

5678

XYZ

Original

Scan data with color erased

Summary of Contents for MX-C402SC























































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-C402SC, Operation Manual, Page: 566 / 822

Search results

Summary of Contents for MX-C402SC

Reviews: