Sharp AR-M350 Imager, Operation Manual

Page: 193 / 280

3-9
3
OWN NUMBER SENDING
This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page
number at the top center of each page that you fax. All pages that you fax include this information. (Page 8-7)
Example of fax page printed out by the receiving machine
MAY-11-2001-FRI 03:00 PM SHARP PLANNING DIV. FAX No. 0666211221 P. 001/001
(1) (2) (3) (4)
(1) Date and time: programmed in the custom settings (page 3-15 of "Operation manual (for printer operation and
general information)").
(2) Own name: programmed with the key operator program (page 8-4).
(3) Own fax number: programmed with the key operator program (page 8-4).
(4) Transmitted page number: 3-digit number appearing in the format, "page number/total pages" (only the page
number appears if you use manual transmission or Quick On-Line transmission). If desired, you can use the
key operator program to omit the page number (refer to page 8-6).
■
Position of sender's information
The key operator program can be used to select whether the sender's information is added outside the original
data or inside the data (page 8-7). The initial factory setting is outside the data.
Outside scanned data Inside scanned data
None of the transmitted image
is cut off; however, the
transmitted data is longer than
the scanned data, and thus
when both the sender and the
receiver use the same size of
paper, the printed fax may
either be reduced or split up
and printed on two pages. The top edge of the scanned
data will be cut off by the
sender's information; however,
when both the sender and the
receiver use the same size of
paper, the printed fax will
neither be reduced nor split
up and printed on two pages.
Direction of transmission
Direction of transmission
Length of
scanned data
Length of
transmitted data
Length of
scanned data
Length of
transmitted data