Sharp AR-M350 Imager, Operation Manual

Page: 228 / 280

6-16
■
Entering numbers and symbols
1
Touch the AB/ab 12#$% key.
When the characters "12#$%" are highlighted, number/
symbol entry mode is selected.
2
Enter the desired number or symbol.
Numbers and symbols that can be entered are as follows:
Screen 1/2
Screen 2/2
* Change screens by touching the key or key
displayed in the screen. If you make a mistake, touch
the
key to move the cursor (
■
) back one space
and then enter the correct character.
You can continue touching keys to enter characters.
You can also touch another character type selection
key (
ÃÄÂ / ãäâ key or AB/ab 12#$% key) to enter
characters other than numbers and symbols.
3
When you have finished entering characters,
touch the OK key.
1&1
You will exit the character entry screen and return to the
programming screen. If you touch the CANCEL key, you
will return to the programming screen without storing
the entered characters.
NOTE
If you are going to use the Web page to edit or delete the
stored name at a later time, do not use the characters ", <,
or >. These characters cannot be displayed in the Web page.
ENTERING CHARACTERS