Sharp AR-M350 Imager, Operation Manual

Page: 148 / 280

28
INTERRUPTING A PRINT OR COPY RUN
INTERRUPT can be used to temporarily stop a long print or copy job so that another copy job can be run. Only copy
jobs can be run during interrupt.
1
Place the original in the document feeder tray
or on the document glass. (page 7)
2
Touch the [INTERRUPT] key.
ORIGINAL
8
1
2
/
11
X
AUTO
0
AUTO
100 %
8
1
2
/
11
X
INTERRUPT
EXPOSURE
PAPER SELECT
When it is possible to
interrupt a print or copy job
in progress, the
[INTERRUPT] key will
appear as shown in the
illustration.
CANCEL
0
AUTO
TO
100 %
8
1
2
/
11
X
EXPOSURE
PER SELECT
ORIGINAL
8
1
2
/
11
X
When the [INTERRUPT]
key is touched in step 2, the
[INTERRUPT] touch key will
be replaced by the
[CANCEL] key as shown in
the illustration. To cancel
interrupt copying at any
time, touch the [CANCEL]
key.
3
Make all other desired settings such as exposure,
paper size and number of copies and then press
the [START] key.
When using the document
glass, replace the original
with the next original and
press the [START] key.
Repeat this operation until
all originals have been
scanned. Then, touch the
[READ-END] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED
,
PRESS [READ-END].
READ-END
■
When step 3 is completed, a copy job icon will appear
at the top of the job icon queue at the left side of the
screen and interrupt copying will start. After the
interrupt job is completed, the interrupted job will
automatically resume.
copy-2_Ep.P65 2/04/01, 19:18 28