Sharp AR-M350 Imager, Operation Manual

Page: 238 / 280

8-6
Fax send settings
The fax transmission settings allow you to adjust certain
parameters for sending faxes to better suit your needs.
The fax send settings are as follows:
●
Auto reduction sending setting
●
Rotation sending setting
●
Printing page number at receiver
●
Call timer at memory sending
●
Date/own number print position setting
●
Recall in case of line busy
●
Recall in case of communication error
●
Times of recall setting in case of line busy
●
Interval of recall setting
●
Quick on line sending
Auto reduction sending setting
This setting lets you select whether to have a transmitted
document reduced to match the size of the other
machine's printing paper. Auto reduction is normally
turned on. If the setting is turned off, documents are
sent in their original size. Because the size is not
adjusted to match the size of the printing paper, part of
the received document may be cut off.
Rotation sending setting
When transmitting a document, this setting allows
you to rotate a ver tically oriented 8-1/2"x11"
document to a horizontal orientation (8-1/2"x11"R),
or rotate a 5-1/2"x8-1/2R" document to 5-1/2"x8-1/
2". The setting is normally turned on, and documents
are rotated counterclockwise. (8-1/2"x11"R
documents are not rotated.)
KEY OPERATOR PROGRAMS
ROTATION SENDING SETTING
ORIGINAL
SET SENDING
DIRECTION
OK
8 X11R 1
/
2
5 X8 R 1
/
2
1
/
2
5 X8 1
/
2
1
/
2
8 X11 1
/
2
Rotation settings can be separately established for
different document sizes. To turn off a rotation setting,
touch the checkbox of the appropriate setting to
remove the checkmark.
Printing page number at receiver
This setting lets you select whether page numbers
are printed at the top of fax pages by the receiving
machine. The normal setting is to have page
numbers printed.
KEY OPERATOR PROGRAMS
Distinctive ring detection
If multiple telephone numbers have been assigned to
your telephone line, the number called can be identified
by its ringing pattern. By using one number for voice
calls and another number for faxes, you can tell which
type of call you are receiving by the ringing pattern.
You can set your machine to automatically receive
faxes when your fax number is called by setting the
pattern that corresponds to your fax number. Six
selections are available. Normally OFF is selected.