9
Operation
General information
Operating Instructions – Compact Extra-Low Voltage Drives
67
9
Operation
9.1
General information
WARNING
Risk of injury and possible damage to property due to automatic restart of the drive
after fault elimination or after a reset.
Fatal or severe injuries and damage to property.
• Disconnect the device from the power supply before rectifying a fault if automatic
restart of the driven machine is not permitted for safety reasons.
• After a reset, make sure that the drive can start up automatically depending on
the setting.
WARNING
Danger of burns due to hot surfaces of the device (e.g. the heat sink).
Serious injuries.
• Do not touch the device until it has cooled down sufficiently.
9.2
Operating display
The device does not have an operating display. For any status queries, use the status
display in the DCAShell engineering software or the LEDs on the engineering adapter.
Also refer to the chapters "DCAShell engineering
and "Engineer-
26718014/EN – 11/2020
