7
DCAShell engineering software
Manual mode demo
Operating Instructions – Compact Extra-Low Voltage Drives
56
2. Click the "Activate demo mode" button [2] to activate the demo mode. Notice: You
can only activate the demo mode if the drive is not enabled.
3. Use the slider [3] to set the setpoint speed and the max. current.
4. Enable the drive. You can only operate the speed control function if the drive is en-
abled via input
IN
A or
IN
B. Press and hold the "<< Counterclockwise" or "Clock-
wise>>" button to specify the speed control [4]. The drive will turn in the corre-
sponding direction for as long as the button is pressed.
5. Use the "Relative" button to position the drive. Specify the increments in a positive
or negative direction in the "Position" edit box.
6. If you want to end the manual mode, click the "Deactivate demo mode" button [2].
Notice: You can only deactivate the demo mode if the drive is not enabled.
26718014/EN – 11/2020
