8
Parameters
Overview of parameters
Operating Instructions – Compact Extra-Low Voltage Drives
62
8.1.2
Display values
The following values can be read via the engineering software and used to diagnose
the drive and its operating behavior.
No.
Parameters
Unit
Class
Description
0x5D Current actual
speed
min
-1
Status
The parameter contains the current actual speed. The
speed is issued in revolutions/minute.
0x5E Current electrical
current, winding
mA
Status
The parameter contains the current actual electrical cur-
rent, which is calculated as the vector addition of I
q
and
I
d
.
0x5F Current actual
position LoByte
1/65 535
revolutions
Status
The parameter contains the current actual position as
part of a revolution.
0x60 Current actual
position HiByte
Revolu-
tions
Status
The parameter contains the current actual position in
whole revolutions.
0x61 Current actual
temperature
PCB
°C
Status
The parameter contains the current actual temperature
of the printed circuit board in °C.
0x62 Current electrical
current I
d
mA
Status
The parameter contains the current electrical current I
d
,
which is calculated within the controller.
0x63 Current electrical
current I
q
mA
Status
The parameter contains the current electrical current I
q
,
which is calculated within the controller.
0x64 Output status
Digital
Status
The parameter contains the current states of outputs
OUT 1 – OUT 3 in bits 0 – 2.
0x65 Status of inputs
IN A, IN B, IN 1,
IN 2
Digital
Status
The current states of digital inputs IN A/IN B/IN 1 and
IN 2 are displayed.
0x66 Not used
Status
Not used
0x67 Not used
Status
Not used
0x68 Not used
Status
Not used
0x69
Analog IN 1
Digits
Status
The digitized value of the analog input is read. Only the
digitized voltage value is delivered, not the interpreted
setpoint or actual value.
0x6A Not used
Status
Not used
0x6B Not used
Status
Not used
26718014/EN – 11/2020
