4
Mechanical installation
Installing the drive
Operating Instructions – Compact Extra-Low Voltage Drives
22
4.3
Installing the drive
CAUTION
Danger as a result of an excessive radial load, an excessive tightening torque ap-
plied to the retaining screws or excessively long retaining screws.
Potential damage to property.
Notice:
• Do not overload the output shaft in a radial or axial direction (see "Technical
data").
• Observe the maximum tightening torques for the retaining screws.
• Observe the maximum length of the retaining screws (see "Determining the
screw length").
CAUTION
Danger due to a discharge of static charges when installing the drive.
Possible damage to the electronic component.
• Use ESD protective equipment during installation.
26718014/EN – 11/2020
