7
Operation
Manual mode
Operating Instructions – CMP ELVCD
79
3. Switch on the voltage supply of the controller.
4. Start the MOVITOOLS
®
MotionStudio software.
5. Start the "ELVCD DriveManager" plug-in.
6. Activate manual mode with the relevant button. For further information, refer to
chapter "ELVCD DriveManager" (→
7.4.3
Using manual mode
The figure below provides an overview of the "Manual mode" window:
[17]
[12]
[14]
[13]
[15]
[2]
[3]
[4] [5] [6] [7]
[8]
[9]
[10]
[11]
[16]
[B]
[1]
[A]
21010803211
[A] "All ELVCD inverters" area
The buttons in this area are used on all listed ELVCD drives.
[B] Single axes area
The edit boxes, buttons and status messages in this area are assigned to the respect-
ive axis. The ELVCD DriveManager only lists the axes configured in MultiMotion or in
the Application Configurator.
[1] [Control Mode] button
Manual mode is activated using this button. Actuation by the controller is prevented.
[2] "Setpoint speed" edit box
Enter the setpoint speed in user units in the edit box.
[3] "Ramp" edit box
Enter the ramp in user units in the edit box.
22759468/EN – 11/2017
