Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Removing
Note
Attach all heat-shielding sleeves in the same places when instal‐
ling.
.
– Remove intake manifold
– Unplug electrical connectors:
1 - At oil pressure switch for reduced oil pressure - F378-
2 - at fuel pressure sender - G247-
3 - On injectors -N30- to -N33- .
– Unscrew bolt -2- and remove screw-type clip.
– Remove bolt -1- and nuts -arrows- and tie up catalytic con‐
verter.
– Remove bolts -arrows- and detach heat shield for drive shaft
(right-side).
– Remove heat-shield sleeve
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1. Cylinder head
73
