Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
3
Crankshaft
⇒ “3.1 Crankshaft dimensions”, page 59
⇒ “3.2 Measuring crankshaft axial clearance”, page 59
⇒ “3.3 Renewing needle bearing in crankshaft”, page 60
3.1
Crankshaft dimensions
NOTICE
Risk of damage to bearing pedestals when the crankshaft is
removed.
If the bolts of the crankshaft bearing cap are loosened, the
bearing pedestals of the cylinder block will be deformed, and
damage to the bearings will result.
– Never remove the crankshaft.
Honing dimension
Crankshaft bearing journal ∅
mm
Basic dimension
42.00 –0.022
–0.042
3.2
Measuring crankshaft axial clearance
NOTICE
Risk of damage to bearing pedestals when the crankshaft is
removed.
If the bolts of the crankshaft bearing cap are loosened, the
bearing pedestals of the cylinder block will be deformed, and
damage to the bearings will result.
– Never remove the crankshaft.
Special tools and workshop equipment required
♦ Universal dial gauge bracket - VW 387-
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
3. Crankshaft
59
