Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Unplug the electrical connector -1-.
– Unscrew bolt -2- and remove Hall sender - G40- .
Installation
– Installation is in the reverse sequence of removal.
Specified torques
♦
⇒ “1.1 Assembly overview - ignition system”, page 268
1.6
Removing and installing engine speed
sensor - G28-
Special tools and workshop equipment required
♦ Socket 4 mm - T10370-
Removing
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Removing and installing noise
insulation .
– Unscrew bolts -arrow- and push charge air cooling pump -
V188- to one side.
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
272
Rep. gr.28 - Ignition system
