Seat Leon 2013, Workshop Manual

Page: 142 / 279

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Rotate oil pump gear to a position where 2 opposing notches
-arrows- are aligned vertically.
– Fit oil pump onto dowel pins.
Specified torques
– Tighten new securing bolts -1- to 8 Nm + 90°.
– Tighten the bolts -2- to 20 Nm.
– Install new crankshaft oil seal on belt pulley end
⇒ page 46 .
– Install oil pan ⇒ page 130 .
– Install alternator ⇒ Electrical system; Rep. gr. 27 ; Alternator;
Removing and installing alternator .
– Secure tensioner with new fastening screws -arrows-.
– Install toothed belt
⇒ page 95 .
Specified torques
♦
⇒ “1.1 Exploded view - sump/oil pump”, page 126
♦ ⇒ “1.1 Exploded view - poly V-belt drive”, page 35
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
136
Rep. gr.17 - Lubrication