Seat Leon 2013, Workshop Manual

Page: 108 / 279

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
3 Valve control
⇒ “3.1 Assembly overview - valve gear”, page 102
⇒ “3.2 Measuring axial play of camshaft”, page 104
⇒ “3.3 Removing and installing camshaft adjuster”, page 104
⇒ “3.4 Removing and installing toothed belt pulley”, page 108
⇒ “3.5 Removing and installing camshaft oil seal”, page 111
⇒ “3.6 Valve 1 for variable distribution N205 removing and fitting”,
page 116
⇒ “3.7 Removing and installing valve stem seals”, page 117
3.1 Assembly overview - valve gear
1 - Inlet valve
❑ Not to be reworked; only
grinding-in permissible
❑ Valve dimensions
⇒ page 125
❑ Valve guides: check
⇒ page 124
2 - Outlet valve
❑ Not to be reworked; only
grinding-in permissible
❑ Valve dimensions
⇒ page 125
❑ Valve guides: check
⇒ page 124
3 - Cylinder head
4 - Valve stem oil seal
❑ Replace ⇒ page 117
5 - Valve spring
❑ Installation position
⇒ page 103
6 - Valve plate spring
7 - Valve cotter
8 - Roller rocker finger
❑ Removing and installing
⇒ “1.4 Removing and in‐
stalling camshaft hous‐
ing”, page 76
❑ Mark installation posi‐
tion for re-installation
❑ Check tapered roller
bearing for ease of
movement.
❑ Lubricate contact surfaces before installing.
9 - Securing clip
❑ For hydraulic compensation element
10 - Hydraulic compensation element
❑ Do not interchange
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
102
Rep. gr.15 - Cylinder head, valve gear