Seat Leon 2013, Workshop Manual

Page: 43 / 279

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
1.1.2 Exploded view - poly V-belt drive, vehicles with air conditioner compressor
1 - Poly-V belt:
❑ Check for wear
❑ Before removing, mark
direction of rotation with
chalk or felt-tipped pen
❑ Do not kink
❑ Routing of poly V-belt
⇒ page 39
❑ Removing and installing
⇒ page 38
❑ When installing, make
sure it is properly seated
on pulleys.
2 - Bolt
❑ Tightening torque
⇒ Item 1 (page 36)
3 - Vibration damper
❑ Removing and installing
⇒ page 41
4 - Tensioner for poly V-belt
❑ Pivot with socket to
slacken poly V-belt
❑ Lock with locking pin -
T10060 A-
❑ Removing and installing
⇒ page 40
5 - Bolt
❑ 20 Nm + 90°
6 - Bolt
❑ Tightening torque ⇒
Electrical system; Rep.
gr. 27 ; Alternator; Ex‐
ploded view - alternator
7 - Alternator
❑ Removing and installing ⇒ Electrical system; Rep. gr. 27 ; Alternator; Removing and installing alternator
8 - Adjusting sleeve
❑ For air conditioner compressor
9 - Air conditioning compressor
❑ Do not unscrew or disconnect refrigerant hoses or pipes.
❑ Removal and installation ⇒ Heating, air conditioning; Rep. gr. 87 ; Air conditioner; Removing and in‐
stalling the air conditioner compressor in the bracket
10 - Bolt
❑ Specified torque ⇒ Heating, air conditioning; Rep. gr. 87 ; Air conditioner compressor; Assembly over‐
view - drive unit of air conditioner compressor .
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1. Cylinder block (pulley end)
37