Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Fit vibration damper, oil threads of bolt for vibration damper
and screw it in to stop by hand.
– Tighten bolt -arrow- of the vibration damper, using the coun‐
terhold tool - T10475- to do so.
– Remove tension device for the Poly V-belt
⇒ “1.3 Removing and installing tensioner for poly V-belt”, page
– Check adjustment of assembly mountings (engine/gearbox
.
Specified torques
♦
⇒ “2.1 Exploded view - assembly mountings”, page 25
♦
⇒ “1.1 Exploded view - poly V-belt drive”, page 35
♦
⇒ “2.1 Exploded view - toothed belt cover”, page 82
♦
⇒ “1.1.2 Exploded view - poly V-belt drive, vehicles with air
conditioner compressor”, page 37
♦
⇒ “2.1 Assembly overview - charge air system”, page 197
♦
⇒ “3.1 Exploded view - air cleaner housing”, page 225
♦
⇒ “2.1 Assembly overview - emission control”, page 263
♦ ⇒ Electrical system; Rep. gr. 27 ; Alternator; Exploded view
- alternator
♦ ⇒ Electrical system; Rep. gr. 27 ; Battery; Assembly overview
- battery
♦ ⇒ General body repairs, exterior; Rep. gr. 50 ; Noise insula‐
tion; Assembly overview - noise insulation
1.6
Crankshaft oil seal- pulley side: replace
Special tools and workshop equipment required
♦ Assembly tool - T10485-
♦ Puller hooks - T20143-
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
46
Rep. gr.13 - Crankshaft group
