Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– First push the coolant pipe onto the mounting -1- until it en‐
gages.
– Then push the coolant pipe onto the mounting -2- until it en‐
gages.
– Check that the coolant pipe has properly engaged by pulling
on it.
Installation is carried out in the reverse order. Please note the
following:
Note
♦
Renew gaskets and O-rings.
♦
Secure all hose connections with the hose clips corresponding
to original equipment ⇒ Electronic parts catalogue .
– Install intake manifold
⇒ “4.2 Removing and installing intake manifold”, page 229
Specified torques
♦
⇒ “3.1 Exploded view - coolant pipes”, page 174
♦
⇒ “4.1 Intake manifold - exploded view”, page 228
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
3. Coolant pipes
177
