Sanyo MCO-19M, Service Manual

Page: 4 / 187

- 1 -
Specifications
Ŷ Strucutural specifications
Name Multi-gas Incubator
Model MCO-19M MCO-19M(UV)
External dimensions W620 x D710 x H900 mm
Internal dimensions W490 x D523 x H665 mm
Interior volume 162 L
Exterior Painted steel
Interior Stainless steel containing copper
Outer door Painted steel
Inner door Stainless steel with gasket
Gas tight split door 4 doors made of temperared glass
Tray
3 trays, made of stainless steel containing copper
Dimensions; W450 x D450 x H12 mm, Maximum load; 7 kg/tray
Access port Inner diameter; 30 mm, On the back side
Insulation Rigid-polyurethane foamed-in place
Heating system DHA system
䠄
Heater jacket and air jacket
䠅
Heater 314 W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
䠄
Resolution: 0.1
o
C
䠅
CO
2
controller PID control system
CO
2
density display Digital display (Resolution: 0.1%
䠅
O
2
controller PID control system
O
2
density display Digital display (Resolution: 0.1%
䠅
Air circulation Fan assisted
Air filter 0.3 μ m, Efficiency: 99.97 % or more
UV lamp (Option) 4 W×1 (Ozone-free emission)
Water level sensor Optical type
Alarms
Automatic set temperature alarm, automatic set CO
2
density alarm,
Automatic set O
2
density alarm, Upper limit temperature alarm,
various gas/sensor/heater alarms, Door alarm, UVlamp failure
Remote alarm contacts Allowable contact capacity: DC 30 V, 2 A
CO
2
inlet connection Diameter; 4
䡚
6 mm tube
CO
2
inlet pressure 0.03 MPaG 䠄 0.3 kg/cm
2
G, 4.3psiG 䠅
O
2
inlet connection Diameter; 4
䡚
6 mm tube
O
2
inlet pressure 0.05 MPaG
䠄
0.5 kg/cm
2
G, 7.1psiG
䠅