RS Automation OEMax CSD7, User Manual, Page: 27 / 332

Before Using the CSD7 Servo Drive 1-
３
CSD7 Servo Drive (EtherCAT)
Model Number of the Servo Drive
The following figure describes the model name on the nameplate of
the servo drive.
•
The nameplate is attached on the side of the drive case. Check
the model name on the nameplate, and check if it corresponds to
the product ordered.
•
The drive type is RS Automation Servo Drive CSD7 Series.
•
The serial number is included on the nameplate. Be careful not to
erase the serial number during the use.
Table 1 Product Classification
Classification Available Operation Modes Special Function
Basic model
• CSP (Cyclic Synchronous Position) mode
• CST (Cyclic Synchronouse Torque) mode
Preminum model
• CSP (Cyclic Synchronous Position) mode
• CST (Cyclic Synchronouse Torque) mode
• Full Closed Loop Control
• STO(Safety Torque OFF) Function
Drive Series
Product Classification Drive Type
Rated Output(W)
Input Voltage(V)
Designing Order CSD7 Series Servo Drive 01 : 100W
02 : 200W
04 : 400W
08 : 800W
10 : 1KW
15 : 1.5KW
B : AC 220V
X :Pulse/Analog Model
N :EtherCAT Model
Blank : Basic Model
F : Premium Model
1 : Ver.1
Servo Drive Series Servo Drive Specifications