Ricoh G148, Service Manual

Page: 328 / 537

004 Trailing Edge – Back
005 Leading Edge – Thick Paper [10~200/1
μ
A]
006 Trailing Edge – Thick Paper
2314 [Tray 4 Trans. Cu] Tray 4 Transnfer Current Adjustment Japan Only
Adjusts the current applied to the transfer belt during [copying and paper feed from Tray 4.
001 Leading Edge: Front [10~200/1
μ
A]
002 Trailing Edge: Front
003 Leading Edge: Back
004 Trailing Edge: Back
005 Leading Edge: Thick Paper [10~200/1
μ
A]
006 Trailing Edge: Thick Paper
2506 [Cont. Op. Time C] Continuous Operation Time Cleaning Setting
001 Operation Setting
Determines whether multiple copy jobs are stopped at regular intervals for: 0) Stopping and
reversing the drum motor to clean the cleaning blade edge, and 1) creating an ID sensor
pattern to correct toner density control.
[0~1/1]
0: No
1: Yes
The interval is set with SP2506-002. Use if the drum gets dirty or images get too pale or too
dark during a long job.
002 Time Setting
Selects the interval at which multi-copy jobs are stopped.
[1~100/1 min.]
2507 [ID Sen. Patt. Du] ID Sensor Patterning During Job
001 Operation Setting
Service Program Mode Tables
327
5