Ricoh G148, Service Manual

Page: 359 / 537

5828 Network
This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the next generation protocol
designed by the IETF to replace IPV4. IPv6 adds many improvements such as routing and network
auto-configuration.
001 IPv4 Address
This SP allows you to confirm and reset the IPv4 address for Ethernet
and a wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.168.000.001" this is read
"0C0A80001h"
002 IPv4 Subnet Mask
This SP allows you to confirm and reset the IPv4 subnet mask for Ethernet
and a wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "255.255.255.00" this is read
"FFFFFF00h".
003 IPv4 DefaultGate
This SP allows you to confirm and reset the IPv4 default gateway used
by the network for Ethernet and wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.169.000.001" this is read
"0C0A80001h"
006 DHCP
This SP code allows you confirm and change the setting that determines
whether the IP address is used with DHCP on an Ethernet or wireless
(802.11b) LAN network.
[0~1/1/0]
0: Not used (manual setting)
1: Used
021 ActIPv4Add
This SP allows you to confirm the IPv4 address that was used when the
machine started up with DHCP. For example, if the the setting of the the
IPv4 address is "0C0A80001h " this is displayed as
"192.169.000.001".
022 ActIPv4 SbNet
This SP allows you to confirm the IPv4 subnet mask setting that was used
when the machine started up with DHCP. For example, if the setting for
the IPv4 subnet mask is "FFFFFF00H" this is displayed as
"255.255.255.000"
5. Service Tables
358
5