091
Web
Disables or enables the Web operation.
[0~1/1]
0: Disable
1: Enable
145
ActIPv6LinkLocal
This is the IPv6 local address referenced on the Ethernet or wireless LAN
(802.11b) in the format:
"Link-Local address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of
16 bits each. These notations can be abbreviated. See "Note: IPV6
Addresses " below this table.
147
ActIPv6Sttles1
These SPs are the IPv6 stateless addresses (1 to 5) referenced on the
Ethernet or wireless LAN (802.11b) in the format:
"Stateless Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of
16 bits each.
149
ActIPv6Sttles2
151
ActIPv6Sttles3
153
ActIPv6Sttles4
155
ActIPv6Sttles5
156
IPv6 Manual Address
This SP is the IPv6 manually set address referenced on the Ethernet or
wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of
16 bits each. These notations can be abbreviated. See "Note: IPV6
Addresses" below this table.
158
IPv6 Gateway
This SP is the IPv6 gateway address referenced on the Ethernet or wire-
less LAN (802.11b). The IPv6 address consists of a total 128 bits
configured in 8 blocks of 16 bits each. These notations can be abbre-
viated. See "Note: IPV6 Addresses " below this table.
161
IPv6StatelessAut
This SP allows you to confirm or set the setting for the stateless automatic
setting function used by either the Ethernet or Wireless LAN (802.11b).
Note: IPV6 Addresses
Ethernet and the Wireless LAN (802.11b) reference the IPV6 "Link-Local a Prefix Length". The
IPV6 address consists of 128 bits divided into 8 blocks of 16 bits:
aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh:
The prefix length is inserted at the 17th byte (Prefix Range: 0x0~0x80). The initial setting is 0x40(64).
5. Service Tables
360
5
Summary of Contents for G148
