Ricoh G148, Service Manual

Page: 360 / 537

023 ActIPv4GateW
This SP allows you to confirm the IPv4 default gateway setting that was
used when the machine started up with DHCP. For example, if the setting
for the IPv4 gateway is "0C0A80001h" this is displayed as
"192.168.000.001".
050 1284 Compatible
Enables and disables bi-directional communication on the parallel con-
nection between the machine and a computer.
[0~1/1]
0:Off
1: On
052 ECP
Disables and enables the ECP feature (1284 Mode) for data transfer.
[0~1/1]
0: Disabled
1: Enabled
065 Job Spool
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
066 HD Job Clear
This SP determines whether the job interrupted at power off is resumed
at the next power on. This SP operates only when SP5828 065 is set to
1.
1: Resumes printing spooled jog.
0: Clears spooled job.
069 JobSpool Protocol
This SP determines whether job spooling is enabled or dispabled for
each protocol. This is a 8-bit setting.
0 LPR 4 BMLinks (Japan Only)
1 FTP (Not Used) 5 DIPRINT
2 IPP 6 Reserved (Not Used)
3 SMB 7 Reserved (Not Used)
090 TELNET
Disables or enables Telnet operation. If this SP is disabled, the Telnet
port is closed.
[0~1/1]
0: Disable
1: Enable
Service Program Mode Tables
359
5