Ricoh G148, Service Manual

Page: 386 / 537

When the status of the paper position does not change at the precise time during paper
folding.
Finisher 129 Shift Tray
When the status of the upper tray limit sensor does not change at the precise time while
lifting the upper exit tray, the status of the upper tray full sensor does not change at the
precise time while lowering the upper exit tray, or the status of the lower tray encoder
sensor does not change at the precise time while moving the lower tray. Returns SC733,
SC726
Finisher 130 Jogger Fences
When the status of the jogger fence HP sensor does not change at the precise time during
jogger fence motor rotation. Returns SC722
Finisher 131 Shift Roller or Guide Plate Motor
When the status of the shift roller HP sensor does not change at the precise time during
shift roller motor rotation, or the status of the guide plate position sensor does not change
at the precise time during guide plate motor rotation. Returns SC732, SC736
Finisher 132 Stapler Movement or Stapler Rotation Motor
When the status of the stapler HP sensor does not change at the precise time during stapler
movement motor rotation, or the status of the stapler rotation sensor does not change at
the precise time during stapler rotation motor. Returns SC730, SC727
Finisher 133 Stapler Unit
Not logged. Returns SC724, SC740, SC741
Finisher 134 Folder Plate Jam
When the status of the folder plate HP sensor does not change at the precise time during
folder plate motor rotation. Returns SC739
Finisher 135 Feed Out Belt Motor
When the status of the feed out belt HP sensor does not change at the precise time during
feed out belt motor rotation. Returns SC725
Finisher 136 Punch Hole Motor
When the status of the punch HP sensor does not change at the precise time during punch
hole motor rotation. Returns SC729
Service Program Mode Tables
385
5