Ricoh G148, Service Manual

Page: 344 / 537

0: Off: Disabled
1: On: Enabled (Default)
Note: The call lamp installation is described in Section "1. Installation".
5051 [Toner Refill Displ] Toner Refill Detection Display Japan Only
5055
Display IP add Display IP Address
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on the IP address will be displayed below "Ready" while the
printer is in standby mode:
Ready
169.254.187.055
5056
Coverage Counter
[0~1/0/1] 0:Not Displayed 1:Displayed
This SP switches the counter list for the system administrator on/off.
5101
[Timer Set]
The machine enters the Energy Save mode after this timer runs out after the end of a job.
[0~9/0/1 min.]
103 Panel Off Set
104 Low Power Set
5104
[Double Count] A3/DLT Double Count
Specifies whether the counter is doubled for A3/DLT. “ When “Yes” is selected, A3 and DLT
paper are counted twice (A4 x2 and LT x2 respectively).
5129 [F Paper Size Selection]
Sets the paper size that the machine detects when the 8 x 13 dial setting on a paper cassette
is used (LT/DLT version).
[0~2/1]
Service Program Mode Tables
343
5