Ricoh G148, Service Manual

Page: 335 / 537

003 Lc1r
Adjusts the area where transfer current is applied for the trailing edge during front
side copying.
[0~+20/1 mm]
004 Lc1
Adjusts the transfer current OFF timing for front side copying.
[–30~+30/1 mm]
005 La2
Adjusts on transfer current ON timing for back side copying.
[–30~+30/1 mm]
006 La2f
Adjusts the area where transfer current is applied for the leading edge during rear
side copying. DFU
[0~+20/1 mm]
007 Lc2r
Adjusts the area where the transfer current is applied for the trailing edge during
back side copying.
[0~+20/1 mm]
008 Lc2
Adjusts the transfer current OFF timing for back side copying.
[–30~+30/1 mm]
009 La3
Adjusts the transfer current ON timing for copying thick paper from Tray 2.
[–30~+30/1 mm]
010 La3f
Adjusts the transfer current OFF timing for the leading edge length when copying
thick paper from Tray 2.
[0~20/1 mm]
011 Lc3r
Adjusts the transfer current ON timing for the trailing edge length when copying
with thick paper from Tray 2.
[0~20/1 mm]
012 Lc3
Adjusts the transfer current OFF timing for copying with thick paper from Tray 2.
[–30~+30/1 mm]
2934 [Transfer Current Ti] Transfer Current On/Off Timing (Tray 3)
001 La1
Adjusts on transfer current ON timing for front side copying.
[–30~+30/1 mm]
002 La1f
Adjusts the area where transfer current is applied for the leading edge during front
side copying.
5. Service Tables
334
5