Ricoh G148, Service Manual

Page: 354 / 537

17
The certification update request has been received from the GW URL, the GW URL was
notified of the results of the update after it was completed, but an certification error has
been received, and the rescue certification is being recorded.
18
The rescue certification of No. 17 has been recorded, and the GW URL is being notified
of the failure of the certification update.
068
CERT: Error
Displays a number code that describes the reason for the request for update of the certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
2 An SSL error notification has been issued. Issued after the certification has expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069
CERT: Up ID
The ID of the request for certification.
083
Firmware Up Status
Displays the status of the firmware update.
084
Non-HDD Firm Up
This setting determines if the firmware can be updated, even without the HDD installed.
085
Firm Up User Che Firmware Up User Check
This SP setting determines if the operator can confirm the previous version of the firmware
before the firmware update execution. If the option to confirm the previous version is selected,
a notification is sent to the system manager and the firmware update is done with the firmware
files from the URL.
086
Firmware Size
Allows the service technician to confirm the size of the firmware data files during the firmware
update execution.
Service Program Mode Tables
353
5