Ricoh G148, Service Manual

Page: 338 / 537

Determines if a blade bend prevention pattern is made when the ID sensor pattern is made.
This setting controls the pattern count. DFU
[0~100/1]
Increase the setting if the rotation of the drum is not smooth, that is, when drum rotation is
making noise.
2950 Vh Pattern Create Vh Pattern Creation Setting DFU
001 Exposure Level [0~15/1]
002 Offset Light Amount [-45 ~-100/1]
2961 [Developer Adjust] Developer Adjust Mode DFU
2962 [Auto Adjust] Automatic Adjustment of Drum Conditions
Push [#Enter] to execute the process control cycle manually.
Note: This SP executes only if SP3901 is enabled.
2963 [Installation Mod] Installation Mode
Press [#Enter] to initialize the developer and force toner supply to the toner hopper at machine
installation.
Important: After you replace developer in a machine that has been already installed, do not
use SP2963 to initialize the developer. Use SP2801 (TD Sensor Initial Setting) to initialize the
TD sensor.
2964 [Transfer Cleaning B] Blade/Drum Protection Pattern
001 Pattern Interval
Selects the interval for application of a strip of toner across drum and transfer belt to prevent
the drum cleaning blade and belt cleaning blade from sticking and bending against the drum
or belt.
[0~200/1 copy] DFU
If set to zero, then no pattern is created.
002 Pattern Light Amount Setting
Adjusts the intensity of light that is used to create the blade protection pattern.
Service Program Mode Tables
337
5