Ricoh G148, Service Manual

Page: 371 / 537

1: Connection to POP server
008
POP to SMTP Wait Standby Wait Time After POP3 Certification
This SP sets the amount of time to allow for the connection to the SMTP server after the trans-
mission has connected to the POP server and been certified during the execution of POP Before
SMTP.
[0~10000/300/1]
009
Rcv Protocol Receive (RX) Protocol
This SP specifies POP3 protocol or switches off receiving.
0: No receiving
1: POP3 protocol
013
POP Auth Encrypt POP3/IMAP4 Certification Encryption
This SP specifies whether password encryption is done for POP3/IMAP4 certification.
0: Automatic
1: No encryption done
2: Encryption done
014
POP Srv Port No POP3 Server Port Number
This SP sets the number of the POP3 server port.
[1~65535/110/1]
015
IMAP Srv Port No IMAP4 Server Port Number
This SP sets the number of the IMAP4 server port.
[1~65535/143/1]
016
SMTP Rcv Port No SMTP RX Port Number
This SP sets the number of the port that receives SMTP mail.
[1~65535/25/1]
017
Receive Interval Mail RX Interval
This SP sets the timing for mail received at regular intervals.
[2~1440/15/1 min.]
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
019
Mail Keep Sett. Server Mail Storage Setting
5. Service Tables
370
5