Ricoh G148, Service Manual

Page: 300 / 537

• The current selection is marked with a large asterisk.
• Press
 or  to display on the 2nd line the item to select.
• When the item that you want to select is displayed on the second line, press [#Enter]. The selected
item is marked with an asterisk.
• Press [Escape] to return to the previous level.
Leaving the SP Mode
1. When you are finished with SP selection, press [Escape] until you see “2.Engine”.
2. Press  to display “3.End”.
3. Press [#Enter] to display “Offline”.
4. Press [Online] to set the printer online.
• Turning the printer power off and on leaves the SP mode, and returns the printer online in normal
operation mode.
SP Mode Print (SMC Print)
1. To enter the SP mode, push and hold down  for 5 sec. then push [#Enter].
<Engine>
1.Feed
2. Press

or

until you see “5.Mode”.
<Engine>
5.Mode
3. Press [#Enter].
SP5024
mm/inch Display
4. Press  to select SP5990.
SP5990 >>
SP Print Mode
5. Press [#Enter].
Service Program Mode
299
5