Ricoh G148, Service Manual

Page: 379 / 537

010 LT LEF
011 Other
6106 [Output Jog Posit] Adjust Output Jog Position
Use this SP code to adjust the positions of the jogger fences when the pages are aligned
(jogged) horizontally in the optional output jogger unit. The jogger fences close in on the
sides of the stack on the paper tray. These side fences move in and out perpendicular to the
direction of paper feed.
[-3 to +3 / 0 / 0.1 mm]
• The higher the setting, the narrower the jogger span and the smaller the gaps between
the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between the
fences and the edges of the paper. Stacking is not as tight.
001 A3 SEF
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 LEF
006 A5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 HLT LEF
012 Other
6107 [CoverFeeder Size] Cover Feeder Size Change
This SP sets the priority paper size setting for the cover interposer tray (B704).
001 JP/NA/EU (All) 0: A3
5. Service Tables
378
5