Ricoh G148, Service Manual

Page: 372 / 537

This SP setting determines whether received mail is stored on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during receiving
020
ParMail RecTOut Partial Mail Receive Timeout
[1~168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during reception. The
received mail is discarded if the remaining portion of the mail is not received during this pre-
scribed time.
021
MDN Res RF2298 MDN Response RFC2298Compliance
Determines whether RFC2298compliance is switched on for MDN reply mail.
[0~1/1]
0: No
1: Yes
022
SMTPAut FieldRep SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the validated account
after the SMTP server is validated.
[0~1/1]
0: No. “From” item not switched.
1: Yes. “From” item switched.
025
SMTP Auth Direct Sending
Occasionally, all SMTP certifications may fail with SP5860 006 set to "2" to enable encryption
during SMTP certification for the SMTP server. This can occur if the SMTP server does not meet
RFC standards. In such cases you can use this SP to set the SMTP certification method directly.
However, this SP can be used only after SP5860 003 has been set to "1" (On).
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used
5866
[E-Mail Report]
Service Program Mode Tables
371
5