Safety Instructions for Toner and Ink
This section describes information for users in regard to the use of toner and ink.
Accidental Physical Exposure
PPC Toner Exposure
• Work carefully when removing paper jams or replacing toner bottles or cartridges to avoid spilling
toner on clothing or the hands.
• If toner is inhaled, immediately gargle with large amounts of cold water and move to a well ventilated
location. If there are signs of irritation or other problems, seek medical attention.
• If toner gets on the skin, wash immediately with soap and cold running water.
• If toner gets into the eyes, flush the eyes with cold running water or eye wash. If there are signs of
irritation or other problems, seek medical attention.
• If toner is swallowed, drink a large amount of cold water to dilute the ingested toner. If there are signs
of any problem, seek medical attention.
• If toner spills on clothing, wash the affected area immediately with soap and cold water. Never use
hot water! Hot water can cause toner to set and permanently stain fabric.
Ink Exposure
• If ink gets on the skin, wash the affected area immediately with soap and cold running water.
• If ink gets into the eyes, immediately flush the eyes with cold running water. If there are signs of irritation
or other problems, seek medical attention.
• If ink is swallowed, drink a strong solution of cold water and table salt to induce vomiting. Seek medical
attention.
• Ink is difficult to remove from fabric. Work carefully to avoid staining clothing when performing routine
maintenance replacing ink packs or ink cartridges.
Handling and Storing Toner and Ink
Handling and Storing PPC Toner
• Toner, used toner, and developer are extremely flammable. Never store toner, developer, toner
cartridges, or toner bottles (including empty toner bottles or cartridges) in a location where they will
be exposed to high temperature or an open flame.
8
Summary of Contents for G148
