Chapter 1
1-2
Esprit® Ventilator Service Manual © Respironics, Inc.
REF 580-1000-02 G
Introduction and Intended Use
Recommended Tools
and Test Equipment
The following table lists the recommended tools, test equipment, and
materials required to service and maintain the Esprit Ventilator (Table 1-1).
Test equipment must meet the requirements in Table 1-2.
Description
Manufacturer and Model
Test Equipment
Digital multimeter and frequency counter (DMM)
accurate to three decimal places
Local Supplier
Pneumatic calibration analyzer capable of
measuring low pressure (cmH
2
O), flow rate
(LPM), and volume (liters)
TSI Certifier Plus (Respironics P/N 1040311)
or equivalent
Electrical safety analyzer
Dale LT 544D or equivalent
Oxygen analyzer with accuracy of ± 2%
TSI Certifier Plus with oxygen sensor kit or
equivalent
Pressure analyzer with accuracy of measuring
high pressure (PSI)
TSI Certifier Plus or equivalent
10 mL calibrated syringe (Neonatal testing)
Hans Rudolph 5220 or equivalent
Adapter, USB to serial
Respironics P/N 1022895
Analog output port signal selector
Respironics P/N 1010891
Esprit Service kit (*included in the kit)
Respironics P/N 1021670
Cable, nurse call test*
Respironics P/N 1001375
Test adapter, O2 regulator*
Respironics P/N 1001376
Cork, silicone*
Respironics P/N 1001735 or equivalent
Adapter, parallel port*
Respironics P/N 1004644
Test lung, 1 liter*
Respironics P/N 1021671 or equivalent
Cable assy, null modem*
Respironics P/N 1022815 or equivalent
Ventilator Accessories
Tubing, silicone, 3/16 in. ID x 6.5 ft., PAP
Respironics P/N C06686 or equivalent
Adult patient circuit tubes, 42-in. smooth bore
(2 each)
Respironics P/N 1003643 or equivalent
Reusable patient wye, 22mm OD/15mm ID
Respironics P/N 1003070 or equivalent
Coupling, silicone rubber
Respironics P/N C06348 or equivalent
Tee, plastic with silicone rubber coupling
Respironics P/N C06260 or equivalent
Connector, plastic, 22mm OD
Respironics P/N C06335 or equivalent
Adapter, O2 sensor
Respironics P/N 1001736 or equivalent
Hand Tools and Materials
Pliers
Local supplier
Needle nose pliers
Local supplier
Metric hex key set (rounded ends), 1.5 to 4 mm
Local supplier
