Chapter 9
9-34
Esprit® Ventilator Service Manual © Respironics, Inc.
REF 580-1000-02 G
Component Removal/Installation
7. To remove the transition PCBA, remove the two M3 x 16-mm screws
and the two M3 flat washers that hold it to the LCD bracket. Then
remove the transition PCBA and the two hex spacers (Figure 9-36).
8. To remove the LCD, remove the four M3 x 5-mm screws and four M3
flat washers that hold it to the LCD bracket (Figure 9-36).
9. Set the LCD face up on a nonabrasive surface.
10. To remove the LCD bracket, remove the two 2.5-mm screws that hold
the LCD bracket to the bezel. Then carefully remove the LCD bracket
from the bezel.
11. To remove the IR touch frame, carefully pop out the IR touch frame
assembly from the bezel.
12. To remove the backlight inverter PCB, remove the two Phillips head
screws that hold it to the bezel.
Figure 9-36: Transition PCB (2nd Generation)
