Raven SmarTrax MD, Calibration & Operation Manual

Page: 93 / 136

5
P/N 016-5030-020 Rev. D 87
ENVIZIO PRO AND CRUIZER II CONSOLES CALIBRATION AND OPERATION
NOTE: To ensure the calibration is successful, the number of starts and stops during the calibration process
should be limited. If it is necessary to pause the calibration process, turn the steering wheel or tap the
foot/enable switch. Tap the foot/enable switch again to resume calibration.
FIGURE 26. Steering Calibration Screens
1. Position the machine in an open space with several acres of smooth ground available to perform the machine’s
steering calibration.
2. Press the foot/engage switch to begin calibration.
NOTE: During calibration, the machine will turn hard to the left and then to the right. Adjust the speed and
vehicle location as necessary.
NOTE: After calibration is complete, the SmarTrax MD menu will be displayed.
NOTICE
The calibration of the machine’s steering system
should be performed in a field or other large,
open space and during conditions similar to
normal vehicle operation.
If the ground or surface is slippery, muddy, or
freshly tilled, the SmarTrax MD system may learn
incorrect steering responses for normal
operating conditions.
Ensure the machine’s hydraulics are operating
properly and there are no other mechanical
issues that may affect the performance of the
SmarTrax MD system.