5.6
Changing the Configuration
5-20
501610 Rev. 07-01-19
5.6.3 Viewing or Editing SCSI Log Settings
The SCSI log contains a history of the SCSI commands and messages sent and received by
the XLS. Qualstar Technical Support may request that you send them a copy of this log to
help debug certain problems.
After talking to Technical Support, use the View/Edit SCSI Log Settings page (described
in this section) to specify what information to record in the log. Then, use the View SCSI
Log page (described in
Section 5.5.3 on page 5-14
) to download the actual log.
To view or edit the SCSI log settings, follow these steps:
1.
From the Home page, access the Service portlet. See
Section 5.3 on page 5-7
.
2.
From the Change Configuration section, select
View/Edit SCSI Log Settings
.
The View/Edit SCSI Log Setting page opens, as shown in
Figure 5-15
.
Figure 5-15
View/Edit SCSI Log Settings page
3.
Change the log settings as instructed by Qualstar Technical Support.
Important:
Selecting
SCSI Major Events
causes all SCSI
commands sent to the XLS to be logged. The results of
the other log settings are intended for use by Qualstar
Technical Support and are beyond the scope of this
manual.
4.
When you are finished, press
Yes
to exit the page.
5.
As required, refer to
Section 5.5.3 on page 5-14
to download the log itself.
Summary of Contents for XLS Series
