5.5
Performing Diagnostics
5-14
501610 Rev. 07-01-19
•
When a door is locked from X-Link.
The XLS automatically scans any door
slots and all areas flagged by the light curtain sensors. For example, if the light
curtain sensors on the left side of the LRM are violated while the doors are open,
the XLS automatically scans the cartridges on the left side of the cabinet when
the doors are locked.
•
When you force an audit
. You can force an audit by selecting
Audit Library
from the Service portlet. See
Section 17.3.2 on page 17-6
.
5.5.3
Viewing the SCSI Log
The SCSI log contains a history of the SCSI commands and messages sent and received by
the library. Qualstar Technical Support may request that you send them a copy of this log
to help debug certain problems. Refer to
Section 5.6.3 on page 5-20
for information
about changing the settings for the SCSI log.
You can view the last 1,000 entries in the log or download the entire log.
Important:
For help interpreting the SCSI log, contact Qualstar
Technical Support.
To view or download the SCSI log, follow these steps:
1.
Access the Service portlet. See
Section 5.3 on page 5-7
.
2.
From the Run Diagnostics section, select
View SCSI Log.
The View SCSI Log
page opens, as shown in
Figure 5-11
.
Figure 5-11
View SCSI Log page
3.
To view the last 1,000 entries in the log, scroll through the log using the scroll bar
on your browser.
Summary of Contents for XLS Series
